最近在二手市场看到了一款性价比超高的京东云亚瑟AX1800 PRO无线路由器，忍不住下手买了一台。成色还不错，于是决定分享一下我的魔改软路由的经历和心得。
首先，这款路由器的配置真的很高。它搭载了高通五核芯片IPQ6000，单核1.5GHz的NPU，算力高达11040DMIPS。这样的配置在处理数据流量时，CPU占用率大幅降低，显著提升了数据转发效率，减少了延时等待。同时，它支持WiFi
6和双频并发技术，网络速度更快，信号覆盖更广。512M的运存和128G的存储空间，放在现在也不过时。由于我没有焊颗粒技术，我直接购买的是扩容好1G内存版本
接下来，分享一下我刷机变成istore OS后安装doceker 过程：
首先要进入后台在 系统→软件包→OPKG 配置 里面添加自定义软件源
src/gz reboot_base http://mirrors.cloud.tencent.com/lede/releases/21.02.3/packages/aarch64_cortex-a53/base src/gz reboot_luci http://mirrors.cloud.tencent.com/lede/releases/21.02.3/packages/aarch64_cortex-a53/luci src/gz reboot_packages http://mirrors.cloud.tencent.com/lede/releases/21.02.3/packages/aarch64_cortex-a53/packages src/gz reboot_routing http://mirrors.cloud.tencent.com/lede/releases/21.02.3/packages/aarch64_cortex-a53/routing src/gz reboot_telephony http://mirrors.cloud.tencent.com/lede/releases/21.02.3/packages/aarch64_cortex-a53/telephony src/gz openwrt_kiddin9 https://op.supes.top/packages/aarch64_cortex-a53 src/gz openwrt_base https://mirrors.cloud.tencent.com/openwrt/releases/21.02.3/packages/aarch64_cortex-a53/base src/gz openwrt_luci https://mirrors.cloud.tencent.com/openwrt/releases/21.02.3/packages/aarch64_cortex-a53/luci src/gz openwrt_packages https://mirrors.cloud.tencent.com/openwrt/releases/21.02.3/packages/aarch64_cortex-a53/packages src/gz openwrt_routing https://mirrors.cloud.tencent.com/openwrt/releases/21.02.3/packages/aarch64_cortex-a53/routing src/gz openwrt_base https://mirrors.vsean.net/openwrt/releases/21.02.3/packages/aarch64_cortex-a53/base src/gz openwrt_luci https://mirrors.vsean.net/openwrt/releases/21.02.3/packages/aarch64_cortex-a53/luci src/gz openwrt_packages https://mirrors.vsean.net/openwrt/releases/21.02.3/packages/aarch64_cortex-a53/packages src/gz openwrt_routing https://mirrors.vsean.net/openwrt/releases/21.02.3/packages/aarch64_cortex-a53/routing
然后使用终端 更新软件包和安装 docker 和 管理软件 luci-app-dockerman
更新包信息 opkg update 安装需要的软件包 opkg install luci-app-dockerman opkg install dockerd
之后就能使用istore 软件包安装 docker 软件了！
发表评论